OR

(314) 770-0880

4220 Rider Trail North
Earth City, MO 63045

(513) 677-3311

106 Commerce Drive
Cincinnati, OH 45140

(603) 512-0866

15 Hooksett Turnpike
Bow, NH 03304

ATOM FlashCut

EASY 888 L30 Series

The ATOM FlashCut EASY 888 L30 Inclined CNC Knife Cutting System is the ideal dieless cutting solution for any synthetic material: from the softest leather or elastic textile to hard/heavy leather for soles

Play Video
The complete accessibility to the inclined working surface (1000mm x 3000mm), the possibility to place materials larger than the actual cutting area due to the canti-levered beam structure, the back space for material support, the high brightness overhead projection system for the layout & piece identification during off-loading, and the dual working area to optimize productivity (alternate between cutting & nesting process) make the FlashCut EASY 888 L30 the perfect cutting system for any factory.

Thanks to the new compact design, the EASY L30 can be placed in any facility, reducing to a minimum the overall floor dimensions. The new multi-sector vacuum surface allows increased suction power and guarantees the perfect “hold-down” of single & multi-layer materials and the highest energy savings at the same time. The powerful multi-tool cutting head (5 or 7 Tools), which can be equipped with a wide range of cutting chucks, marking pen and 3 or 5 punching tools, increase the machines overall versatility allowing a broader range of materials to be cut. In particular, the pneumatic oscillating knife chuck for cutting thick leather, shank board and multi-layer textile materials.

The EASY models can be combined with a wide range of Off-Line Leather Acquisition Systems equipped with digital pens for quality area marking (Vision Plus Models).

In addition to the traditional shoe & leather goods components commonly cut on the EASY series, the ATOM FlashCut EASY 888 L30 is the ideal knife cutting table for a wide range of materials used in the petro-chemical industry (tang graphite included), foams and adhesive backed foams (up to 25mm in thickness), rubber materials, composites (kevlar, pre-preg, carbon fiber etc.), plastics, components used in the medical field and similar products.

FlashCut EASY 888 L30 VRX

EASY 888 L30 VRX Video

VRX, the new Knife Cutting System with Automatic Visual Detection developed by ATOM, is ideal for printed materials and trimming.

Innovative knife cutting system with automatic visual detection, engineered for printed materials and re-cut. The high-resolution cameras allow to automatically recognize multiple different prints based on the color contrast between the material and the figures. The Pattern Matching modality allows the machine to automatically find pre-loaded shapes on the material.

Technical Spefications
ModelWorking Area
Max Absorption
888 L30 VRX3000x1000mm6.8 KW

Range - Models

Modular Heads

5-Tool Head

The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.

7-Tool Head

The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).

5-Tool Head

The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.

7-Tool Head

The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).

Tooling Combinations

Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.

Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.

The Drag Knife Chuck (DKC) is ideal for total cutting rigid materials like thin compressed non-asbestos, laminates & plastics up to 6mm (1/4”) in thickness.

The Electric Oscillating Knife Chuck (EOK), is ideal for cutting softer, low-medium density materials like thin foams, soft rubber, pure graphite, leather, laminates, adhesives and similar products.

The pneumatic milling chuck, or PMC, was designed for companies that want the flexibility for light-duty milling applications for rigid materials, primarily plastics (ABS, UHMW, PP, PE etc..), that are not capable of being cut with the traditional pneumatic oscillating knife chuck.​

The Pneumatic Oscillating Chuck (POC), is an air driven tool engineered for cutting the most difficult materials but is also used for cutting thick, soft substrates as well.​

The Powered Rotary Chuck (PRC), is designed for cutting difficult fibrous materials, both uni-lateral & bi-lateral weaves, at a high rate of speed. The PRC is suitable for processing carbon fibers, Kevlar, fiber-glass, aramid and technical textiles & composites in general.​

The Ultrasonic Knife Chuck is ideal for high durometer rubbers and some plastics at high speeds in a single pass.

UKC (UKLTRASONIC KNIFE CHUCK) Video

+PLUS|Flashcut Easy

Partitioned Vacuum System

Powerful, partitioned and adjustable vacuum system. Best fixing during cutting and highest energy saving.

Performance and Reliability

Perfect quality and cutting speed, accurate mechanic engineering. State-of-the-art electronics.

Two Cutting Areas

Two working areas to collect the cut pieces on production time. Labor saving.

Two Cutting Heads​

Two independent working areas to boost productivity.

Acquisition Systems​

In-line and off-line leather acquisition systems. Digital pen for marking quality areas.

Optimized Nesting​

Customized automatic nesting system. User friendly interface. Reduction of the process times and maximum material yield.

Applications​

Solid structure and cutting precision even for fields different from footwear and leather goods.

Modular Material
Handling Solutions​

Standard & custom engineered material unwinds stands & winders, feeding and spreading machines, sheet-loaders, and in-line loading & off-loading tables.