ATOM FlashCut
Speedy BP Series
Equipped with international patented “pinch and grab” feeding system, which assures highest feeding accuracy and maximum material fixing during cutting, with dedicated nesting software, they are the best solution to cut textiles even in multiple layers.
For multi-layer textile material processing, the multi-position roll holder, or a spreading device for laying up to 50 layers, the exclusive “pinch and grab? System ensures the perfect handling of the material to the cutting area, while the two cutting heads with multiple tools allow to quickly and precisely process textiles. The Speedy BP is equipped with either a 1650mm or 2100mm wide conveyor belt, perfectly sized to process textile rolls, and an advanced nesting software that optimizes material yields.
Range - Models
SPEEDY 1660
Working Area (MM)
1540 x ∞
Max Absorption (KW)
10,5
Sizes(MM)
2240x2828x2082
Description
With double cutting heads equipped with 5 or 7 tools and 1600mm wide conveyor belt.
Speedy 1660 Floorplan
SPEEDY 2160
Working Area (MM)
2040 x ∞
Max Absorption (KW)
12,9
Sizes(MM)
2734x2853x2264
Description
Same design and features of 1660 models, but with a 2100mm wide conveyor belt.
Speedy 2160 Floorplan
SPEEDY 2660
Working Area (MM)
2535 x ∞
Max Absorption (KW)
20.2
Sizes(MM)
3220x3170x2302
Description
With 2600mm wide conveyor belt and tilting table to increase the support and nesting area.
Speedy 2660 Floorplan
Modular Heads
5-Tool Head
The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.
7-Tool Head
The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).
5-Tool Head
The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.
7-Tool Head
The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).
Tooling Combinations
Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.
Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.
The Drag Knife Chuck (DKC) is ideal for total cutting rigid materials like thin compressed non-asbestos, laminates & plastics up to 6mm (1/4”) in thickness.
The Electric Oscillating Knife Chuck (EOK), is ideal for cutting softer, low-medium density materials like thin foams, soft rubber, pure graphite, leather, laminates, adhesives and similar products.
The pneumatic milling chuck, or PMC, was designed for companies that want the flexibility for light-duty milling applications for rigid materials, primarily plastics (ABS, UHMW, PP, PE etc..), that are not capable of being cut with the traditional pneumatic oscillating knife chuck.
The Pneumatic Oscillating Chuck (POC), is an air driven tool engineered for cutting the most difficult materials but is also used for cutting thick, soft substrates as well.
The Powered Rotary Chuck (PRC), is designed for cutting difficult fibrous materials, both uni-lateral & bi-lateral weaves, at a high rate of speed. The PRC is suitable for processing carbon fibers, Kevlar, fiber-glass, aramid and technical textiles & composites in general.
+PLUS|Flashcut Speedy
Partitioned Vacuum System
Powerful, partitioned and adjustable vacuum system. Best fixing during cutting and highest energy saving.
Pinch-Grab Feeding System
Covered by international patent, it assures maximum material feeding, even for multiple layers.
Two Cutting Heads
The cutting and punching speed, applied to two independent heads, allows high output.
High Cutting Accuracy
The perfect parallelism between knife and working surface grants the highest cutting accuracy.
Picking Assistance
Speedy and easy picking of cut pieces thanks to the original software managing the back projectors, allowing to gather parts by size and color.
Optimized Nesting
Customized automatic nesting software. User friendly interface. Reduction of the process times and maximum material yield.
Acquisition Systems
In-line and off-line leather acquisition systems. Digital pen for marking quality areas.
Modular Material
Handling Solutions
Standard & custom engineered material unwinds stands & winders, feeding and spreading machines, sheet-loaders, and in-line loading & off-loading tables.
Downloads
Download SPEEDY Series Brochure
PDF - 1.79 MB
Download SPEEDY 1660 BP & 2160 BP Brochure
PDF - 2.04 MB
