ATOM FlashCut
Master 2185
The all-new FlashCut Master 2185 is an all-purpose solution to cut both leather and man-made materials.
VRX TECHNOLOGY
The new VRX Technology is purposely developed for man-made materials and trimmings. It can trim, recognize printed materials/ logos and cut them centered (on leather, too), as well as cut clear shapes on printed materials (such as soft or elastic materials).
MULTILAYERS CUTTING
Cutting of multi-layer materials thanks to the double-pincer system with removable mobile pincer. Easy unloading of the synthetic materials through an innovative photocells system.
AUTOMATIC SETTING OF THE CUTTING HEIGHT
Less wear of the cutting belt thanks to knife checking at regular intervals. The monitoring of the knife use is simplified thanks to the machine reporting system and the OPC-UA protocol.
LOWERED NOISINESS
The innovative soundproofing system of the vacuum pump makes the FlashCut Master 2185 noiseless even when used at full speed.
Modular Heads
5-Tool Head
The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.
7-Tool Head
The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).
5-Tool Head
The 5-tool cutting head increases the overall versatility of the ATOM Flashcut and is one of the key factor of its success - the ability to total cut, score cut (partial depth cut) & kiss cut with one module, two auxiliary stations that can be equipped with rotating punches for precise small diameter holes, a creaser wheel or kiss cutting knife, a 4th station that includes a marking pen to apply part #’s and trademarks and a 5th non-rotating punch station that is used on light-weight materials. With this versatile head, the Flashcut now becomes a multi-functional production system for a variety of market sectors.
7-Tool Head
The 7-Tool head offers the same combination as the 5-Tool head yet adds two additional rotating punching-drilling stations for increased flexibility. The pneumatically controlled belt-driven punch stations are primarily used for perforating leather, or for punching small diameter holes in gaskets & textile materials. Four independent punch tools on a single head allows for different hole sizes to be produced on the same job. To accommodate different applications, punches are available in sizes ranging from 0.5mm to 8mm & are made from tungsten carbide or high-speed steel (HSS).
Tooling Combinations
Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.
Side auxiliary tools can include rotating punches/drilling stations, kiss cut tool, creaser wheel for carton stock or thin plastics, or a 45° angle knife. Only available on the 5-Tool or 7-Tool modular head.
The Drag Knife Chuck (DKC) is ideal for total cutting rigid materials like thin compressed non-asbestos, laminates & plastics up to 6mm (1/4”) in thickness.
The Electric Oscillating Knife Chuck (EOK), is ideal for cutting softer, low-medium density materials like thin foams, soft rubber, pure graphite, leather, laminates, adhesives and similar products.
The pneumatic milling chuck, or PMC, was designed for companies that want the flexibility for light-duty milling applications for rigid materials, primarily plastics (ABS, UHMW, PP, PE etc..), that are not capable of being cut with the traditional pneumatic oscillating knife chuck.
The Pneumatic Oscillating Chuck (POC), is an air driven tool engineered for cutting the most difficult materials but is also used for cutting thick, soft substrates as well.
The Powered Rotary Chuck (PRC), is designed for cutting difficult fibrous materials, both uni-lateral & bi-lateral weaves, at a high rate of speed. The PRC is suitable for processing carbon fibers, Kevlar, fiber-glass, aramid and technical textiles & composites in general.
+PLUS|Flashcut Speedy
Partitioned Vacuum System
Powerful, partitioned and adjustable vacuum system. Best fixing during cutting and highest energy saving.
Pinch-Grab Feeding System
Covered by international patent, it assures maximum material feeding, even for multiple layers.
Two Cutting Heads
The cutting and punching speed, applied to two independent heads, allows high output.
High Cutting Accuracy
The perfect parallelism between knife and working surface grants the highest cutting accuracy.
Picking Assistance
Speedy and easy picking of cut pieces thanks to the original software managing the back projectors, allowing to gather parts by size and color.
Optimized Nesting
Customized automatic nesting software. User friendly interface. Reduction of the process times and maximum material yield.
Acquisition Systems
In-line and off-line leather acquisition systems. Digital pen for marking quality areas.
Modular Material
Handling Solutions
Standard & custom engineered material unwinds stands & winders, feeding and spreading machines, sheet-loaders, and in-line loading & off-loading tables.
