Subtotal:
£0.00
Pressure Multipliers
Tecnocut offers a complete range of high-pressure intensifier pumps for your pure-water or hydro-abrasive waterjet cutting system that meets different demands: low investment, high production standards, high cutting power and energy saving. Regardless of the pump you choose, you can be confident that Tecnocut high pressure intensifier pumps offer the highest pressure ratings in the industry with the latest technology employed. With this range, Tecnocut can offer the ideal pump solution that is best suited for the application; reliable, efficient and easy to maintain.
Jetpower EVO 30/60/120 HP High Pressure Intensifier
Tecnocut established a new concept of ultra-high pressure intensifiers by giving its uniqueness and exclusivity, enhancing its technology, making it the real answer to the requests of the most demanding users. The original technical design was for the system to be fitted with several electronically synchronized, parallel, independent pressure multipliers. This allows increasingly constant pressure, avoiding typical drops of the traditional pump with a single opposite cylinder.
ADVANTAGES:
- Perfect cutting quality due to the stability of the dynamic pressure signal.
- Diminished wear of high pressure components, giving longer machine life and a reduction in technical maintenance requirements.
- The two (30HP), three (60 HP) or six (120HP) independent pressure multipliers system allows ongoing operation of the pump by using two of the cylinders while the third is undergoing maintenance. This allows the Operator to decide when to proceed with maintenance without the requirement of stopping the production cycle, thus providing a saving in time and costs.
- Electronic pressure controlled by software
- Electronic monitoring of temperature, pressure and filter.
- Air/oil cooling system. No additional water consumption for the cooling.
- Sound proof protection.
Easypump 30/60 HP Pressure Intensifier
The 30 or 60 HP pressure intensifier is composed of 2 (30HP) or 3 (60 HP) parallel, synchronized and independent pressure multiplier pumps, hydraulically driven, and electronically synchronized. This technical solution assures a constant and even pressure signal, which is far more stable traditional opposed pumps.
ADVANTAGES:
- Perfect cutting quality due to the stability of dynamic pressure signal.
- Stronger and harder wearing high pressure components, giving longer machine life and a reduction in technical maintenance requirements.
- Compact structure with easy access to all serviceable components.
Greenjet EVO 30/60/120 HP High Pressure Intensifier
Tecnocut established a new concept of ultra-high pressure intensifiers by giving its uniqueness and exclusivity, enhancing its technology, making it the real answer to the requests of the most demanding users. The original technical design was for the system to be fitted with several electronically synchronized, parallel, independent pressure multipliers. This allows increasingly constant pressure, avoiding typical drops of the traditional pump with a single opposite cylinder.
ADVANTAGES:
- Perfect cutting quality due to the stability of the dynamic pressure signal.
- Diminished wear of high pressure components, giving longer machine life and a reduction in technical maintenance requirements.
- The two (30HP), three (60 HP) or six (120HP) independent pressure multipliers system allows ongoing operation of the pump by using two of the cylinders while the third is undergoing maintenance. This allows the Operator to decide when to proceed with maintenance without the requirement of stopping the production cycle, thus providing a saving in time and costs.
- Electronic pressure controlled by software
- Electronic monitoring of temperature, pressure and filter.
- Air/oil cooling system. No additional water consumption for the cooling.
- Sound proof protection.
Tecnocut is an industrial partner that can supply complete systems with cost effective cutting performances, thorough training, applications advice and post-sales technical support. Tecnocut is the only manufacturer in Italy, and among the few in the world to engineer and develop everything internally. Three basic components: ultra-high pressure intensifiers, cutting robots and highly sophisticated software.